Tuesday, November 13, 2012

Category Description of artificial turf


Imitation grass-like synthetic fibers, implanted in a woven fabric, the back painted from the fixed effect of coating for the sports arena, for artificial turf on the garden floor and green ground.
Its raw material is a polypropylene-based, can also be used, such as polyvinyl chloride and polyamide. The leaves on the the imitation grass green, and the need to add UV absorbers.
Artificial turf looks bright green seasons, lively, good drainage performance, long life, low maintenance costs.
Synthetic turf sports systems on the basis of the quality requirements are mainly concentrated in three areas: hardness, flatness and drainage slope.
Artificial grass base three categories: asphalt base, cement foundation, gravel base, which type is mainly used by the local climate and environment and budget decisions, particularly suitable for the northern large temperature difference between the low winter temperatures climate and environment, but also because it is expensive, for a warm and humid environment is not the most suitable foundation type, gravel foundation because of its simple construction, low cost, rapid drainage, more common in the South, but because of its rigidity and stability, long easy to use foundation loose, resulting in an uneven foundation; therefore, the underlying type of artificial grass in most regions of the domestic cement concrete foundation became economic cost is very high. Based on a wealth of experience in the buy artificial grass system, double and sports on artificial grass cement concrete foundation to do a brief introduction as follows:
1, higher requirements on the basis of surface flatness, to ensure that the artificial turf surface layer of uniform thickness, uniform elasticity. Flatness pass rate above 95%,
5 m ruler error 3MM, slope: horizontal 8 ‰, vertical 5 ‰, the semicircle District 5 ‰, the surface should be flat and smooth to ensure drainage.
2, the base should have a certain amount of strength and stability.
3, uniform surface and solid, no cracks, no bad side pockmarked face, straight and smooth seams, 6000mm × 6000mm cuts as well.
4, cushion compaction, density greater than 95%, after the pressure of the medium-sized rolling machine, no significant round track, no surface dust loose, wave phenomena such.
Cement foundation artificial lawn necessary aquifuge the new PVC thickened aquifuge impermeable film, the junction should be greater than 300mm edge margin greater than 150mm.
6 need to consider the extension gap width of 5 mm.
7, the basis of the maintenance period of 2-3 weeks.

1 comment:

  1. I have been visiting various blogs for Artificial Gass Lawns. I have found your blog to be quite useful. Keep updating your blog with valuable information... Regards

    ReplyDelete